Description
Overview
LED Autolamps 37 Series Red/Amber Side Marker is a compact two-LED lamp designed for reliable visibility on trailers and small craft. With a chrome surround and a clear lens revealing coloured LEDs, it suits tidy installations where space is limited. The multivolt 12–24V design keeps output consistent across mixed fleets, and the curved 70mm body follows panel contours for a neat finish.
Features
- Click and stick fitting with serrated plugs and 3M tape for fast, tool-free installation.
- IP67 sealed housing resists dust and water ingress for marine and road use.
- Low current draw of 0.04A at 13.8V and 28V for minimal load on circuits.
- Harness-system compatible two-pin connector and 10cm cable for neat routing.
Specifications and Materials
| Part Number (ID) | 37CCARM2P |
| Function | Red/Amber side marker |
| Dimensions | 70mm x 35mm x 20mm |
| Voltage | Multivolt 12–24V |
| LEDs | 2 |
| Current Draw | 0.04A @13.8V, 0.04A @28V |
| Cable | 10cm with specially designed plug |
| Housing | Chrome surround, clear lens with coloured LEDs |
| Ingress Protection | IP67 (series rating) |
For detailed specifications from the manufacturer, see the LED Autolamps 37 Series Chrome spec sheet
Compatibility and Fitment
LED Autolamps 37 Series Red/Amber Side Marker mounts to a flat or gently curved surface. Fitment requires two 6mm holes for the serrated plugs plus an 8mm cable hole as per the series instructions. Because the lamp is multivolt and compact, it works well on box trailers, boat trailers, utility bodies and rigid hulls. It also interchanges with other 37 Series markers, so upgrades from single-colour variants are straightforward without wiring changes.
Compliance and Safety
The lamp is ADR 45/01 approved as a side marker with CRN 43515, and the series carries relevant ECE approvals. Installation should follow ADR 13/00 positioning guidance for marker lamps to maintain roadworthiness. The IP67 sealing supports safe operation during washdown and exposure to rain, while solid-state LEDs reduce heat and vibration sensitivity for improved reliability.
Marine Applications
Although primarily specified for road transport, LED Autolamps 37 Series Red/Amber Side Marker is also useful around marinas and boat yards. It is suitable for delineating trailer mudguards and cross-members, marking equipment racks on workboats, or adding conspicuity to service carts. Because the current draw is very low, multiple markers can be added to long runs without overloading the circuit, provided wiring and fusing are sized correctly.
Why Choose Argomarine
Argomarine sources genuine LED Autolamps lighting so you can standardise on proven components. We verify every key specification against manufacturer documentation and present clear fitment notes to reduce installation time. Furthermore, our team can help match this marker with front, rear or single-colour 37 Series companions for a consistent, compliant lighting set across your fleet or build.
Browse more boat and trailer lighting and accessories in our Boat & Trailer Accessories category
